Title III: Building and civil engineering

When, in the course of assembly, dismantling or lifting work on frames and structures, workers are called upon to intervene where they are exposed to the risk of falling into a void, the employer shall take one of the following measures: 1° Installation of fixed work floors, fitted with guardrails placed at a height of 90 centimetres and skirting boards at least 15 centimetres high; 2° Implementation, under the conditions…

Work platforms, gondolas and similar devices used for the transport or elevated work of workers employed on work mentioned in this section, as well as the lifting equipment from which these platforms, gondolas or similar devices are suspended, comply with the provisions relating to the lifting of persons set out in articles R. 4323-31 and R. 4323-32.

If the devices provided for in articles R. 4534-96 and R. 4534-97 are not installed, or if work platforms or any other similar devices suspended from lifting equipment are not used, the following shall be installed: 1° Either canopies, fans or floors capable of preventing a free fall of more than three metres; 2° Or nets, or any other device of at least equivalent elasticity, capable of preventing a free…

The devices provided for in 1° and 2° of article R. 4534-99 are arranged in such a way as to prevent the effects of tipping or bouncing.

Where it is impossible to implement the safety measures provided for in articles R. 4534-96 to R. 4534-99, a fall arrest system must be worn.

Protective helmets must be worn when assembling, dismantling and lifting structures and frameworks.